0 – Introduction In a previous article we made an emulator/interpreter for Chip8 in C++ to be ran on Ubuntu, in this article, we will make small changes and new platform specific modules to run that emulator on a Esp32 (using the Arduino IDE). Before starting, check out our tutorial on how to install and […]
Esp32 Tutorial: Chip8 Emulator Read More »
0 – Introduction This small project will show you how to use an Esp32 to read the state of a button and output it to a LED, you should also be able to recreate this project with little to no changes in a arduino. For this, you will need: 1x Esp32 1x Button 1x Led
Esp32 Tutorial: LED Control with Button Read More »
0 – Introduction With a lot of projects, having a way to display information is vital, so we will, in this article, use one of the most popular libraries there is, with the ammount of oled displays supported, it is unmatched. That library is U8g2. In this tutorial I will use a 128×32 oled display
Esp32 Tutorial: SSD1306 Oled Display With I2C Read More »
0 – Introduction In this article we will be using two of the Esp32 boards we reviewed, to send and receive a message using ESP-NOW. Hardware needed: 2x Esp32 (like this one) 1x Usb Cable (type a to type c in our case) Any computer with VsCode and platformIO 1 – Code To setup espnow
Esp32 Tutorial: Esp-Now Broadcast Read More »
0 – Introduction In this article we will review an Esp32 with Type-C, if you like the product and want to support us, you can buy it via one of the links available throught the article. If you are starting to get into the world of microcontrollers you probably already know about arduinos, but what
Review: Esp32-Wroom with TypeC Read More »